Sealing envelopes when you print postage on the SendPro C

You can seal envelopes and print postage at the same time with your SendPro C.
Products affected: SendPro® C (2H30, R2H30, 7H30C, R7H30C)

You can seal envelopes and print postage at the same time with your SendPro C.

  1. Check the level of sealing solution in the moistener tank. Add more if required.
  2. Tap Envelope Printing on the Home screen.
  3. Tap Account and select an account if accounting is enabled on your device.
  4. Tap Weight.
    Weight button
  5. Tap Scale.
  6. Place the envelope on the scale. You must do this before the next step or else Apply remains inactive.
  7. Tap Class then select the class of mail you want.
  8. Tap Graphic then select a graphic, if necessary.
  9. Tap Apply to continue.
  10. Slide the envelope flap under the edge of the feed deck so the moistener can wet the flap.
    Envelope flap fed underneath the feed deck
    Envelope feeding through the device
  11. Insert the envelope into the device. The device prints the postage.

Important: If the moistener tank is full and your envelopes do not seal correctly, clean the moistener brush and wick.

Related topics

UPDATED: 19 September 2024

Contact Us
Email
Report an issue from your inbox.
13 23 63
Mon – Fri, 8am - 5pm (Ex. Public Holiday)